24.2 cu. ft. French Door Refrigerator

24.2 cu. ft. French Door Refrigerator

Contact Author Learning About Fridge Water Lines When hooking up a water line to a fridge ice maker or a door water supply, you want to use the correct materials to ensure the water flows well and everything is hooked up correctly with minimal chance of leaks. Many refrigerators these days supply a source for drinking water inside or on the door and will make ice cubes for you. To have a water dispenser or ice maker in your fridge, you need to be able to get water from your cold water supply to your fridge in an efficient way. Something that you might not have considered is what types of plumbing material are you going to use. Even if you are hiring a plumber, you should be aware of the different options available and what they mean to you. The only problem I see with using copper is that it can kink easily. You will have extra tubing behind your fridge to enable you to pull your fridge out for cleaning purposes, and it is quite possible that the line could get caught and kink causing the water flow to be blocked or worse. PVC or plastic tubing is also an option. Plastic is very cheap.

How much to install a new ice maker?

The icemaker hook-up kit: Plastic ferrule used with plastic tubing The refrigerator. This appliance was surrounded by a tight enclosure, making access tricky. Luckily, there was a return-air grill right behind the refrigerator.

Feb 02,  · What’s the most effective way to hook up a water line to the refrigerator? I’ve spent way too much time trying to repair this and I’m getting no where. Background: The connection at the refrigerator came apart and water made its way under my hardwood : Resolved.

You can solve this with an ice maker installation kit that allows you to use the plumbing beneath the sink. The kit provides you with the required parts to hook up a water line to your refrigerator. You may have three water supply lines beneath the sink; two lines connect directly to the faucet while the third line connects to the dishwasher. The valve connected to the right side of the faucet is the cold water supply line. Turn the cold water on the supply line clockwise to close it.

Drill holes in the base cabinet walls to route the water line from beneath the sink to the rear of the refrigerator. Drill as close to the back wall of the cabinet as possible, so you do not lose storage space inside the cabinet. Leave the excess water line behind the refrigerator. Use pliers to untwist the faucet supply line from the cold water supply valve. Twist the male end of a quick-tee adapter onto the valve.

Wrap the female thread on the opposite end of the adapter with thread-seal tape. Twist the faucet supply line onto the female end of the adapter. Make sure the threads are facing the end of the line.

How to Install a Water Line for a Refrigerator

But once you’ve bought a refrigerator with a cold water dispenser and automatic ice maker, you’ll still need a way to get water into it. It takes patience, but you can hook a water line up to your refrigerator on your own. Family Handyman , Whirlpool ].

step 8 – refrigerator hook up Install “T” on clear tube going to faucet. Run a 1/4″ poly propylene tube up to 30′ from the R.O. system and connect to the refrigerator.

I had the totally opposite experience happen yesterday. I bought another LG refrigerator to replace it. This one is slightly larger but still will fit through the door with the handles taken off. The one that I currently have had to have the handles taken off to get it in the house as well. The delivery guy arrives yesterday and immediately has an attitude. He’s saying how it isn’t going to fit, didn’t the salesman explain to me how to measure like I’d be too stupid to understand how to measure on my own , they can’t get it in, etc.

I asked him what he meant because it surely would fit in the door. I told him I had measured and it fits, he has to take the handles off.

how to hook up ice maker on refrigerator

Can’t find a solution to your problem? Post a question in our Forums. Piping Question Simple question, hopefully a simple answer.

The Ice Maker Connection Kit is the all-inclusive solution to install a water supply line to your ice maker with no additional tools necessary. SharkBite’s innovative design makes for a quick and easy installation without sacrificing durability.

Edit Answer for another minute Tap could come off the line in the crawlspace, or off the cold water pipe serving the washer. Crawlspace solution costs a bit more for the plumber work, but does not require any drywall repair like tapping the water pipe at the washer would, assuming it has the normal wall-insert box for the two faucets. If you have exposed cold water pipe there – about 4 inches worth or more if metal or PVC or exposed connection plus an inch or so if threaded Pex or similar, then either a Tee or a hot tap small hole punched through the copper or metal pipe without even turning water off could be used to source the water,then flexible tubing through wall or flooring to behind the reefer.

In addition to through wall from behind or up from crawlspace, snaking around behind cabinets assuming type with a utility gap left behind from a water line connection below the sink is the most common approach to this. Usually only requires pulling out the bottom panel in corner cabinet and of course the under-sink cabinet bottom panel , if there is a corner between sink and reefer. Is run with bendable copper tubing or flexible plastic tubing, depending on your code requirements.

Answered 4 years ago.

How Do I Connect an Ice Maker Supply Line?

Your name or email address: Brush pipe dope onto the cone-shaped ground joint connection. Best way to hook up water line to refrigerator Up for our newsletters! About Erika Wise best way to hook up water line to refrigerator Imagine the convenience of having cold water or ice cubes any time you want them — no more filling up pitchers to keep in the best way to hook up water line to refrigerator or waiting for ice cube trays to freeze.

Check for leaks in water tubing on rear of refrigerator. Disconnect refrigerator from power supply, remove rear compartment cover, then check water connec ons on water valve. Water leak under refrigerator P/N Rev A INSTALLATION INSTRUCTIONS 4.

Winnipeg Aug 17th, 8: I just need to pick up a in-line shut off valve and I’m set. I plan on tapping in to the RO filter line just below the tap with a T connector, then run the line through the cabinet side panel into the dishwasher cavity. From this location I can get to the house floor easy with out going through the floor of the counter cabinet.

My basement is finished as well, but I have suspended ceiling and can easily lift a tile. There’s no need to be perfect or neat, as everything is covered up with the ceiling tile. As long as you can run the line and holes kinda line up.

Wall cabinets

Aug 20, 0 comments I bought a new refrigerator from Lowes and Expo came out the next day to deliver it. Lowes – Review in Installers category from Whittier, North Carolina Once disconnected water starting spraying all over my kitchen walls and flooding the floor. All the guy did was put his thumb on the connection, my wife had turn the water off for them. So while my wife is on her knees cleaning up water that they refused to clean, one of the men got under the sink where the connection was and somehow, God only know how, disconnected the hose from the connection.

Well again water started pouring into the cabinet. Expo closed the cabinet doors and left it that way and didn’t say anything to my wife about it, had her sign a form stating no leaks were found and then quickly left.

Buy today – ships today. Over million appliance parts in stock. Original, high quality Refrigerator Hose or Tube parts with fast shipping and award winning customer service.

Feb 13th, My judgement is just fine And sorry to you fine sir, here’s just a random google search result: Refrigerator icemakers use a valve that opens and closes very quickly. The quick opening of the valve is a good feature, but the quick closing of the valve can cause problems. When any type of water valve is closed quickly it can cause water hammer in the water line by literally creating waves in the water pipes as flowing water stops and flows back against the oncoming flow causing a pressure spike and the pipes to vibrate.

Vibrations can cause pipes to loosen or eventually cause older piping to crack and unexpectedly rupture. Water-line breaks can also develop from movement or accidental bumping of the pipes, which naturally can occur with normal refrigeration use. A small leak can quickly turn into a major problem if left undetected. I am not putting down Sharkbite and in fact recommended it as an alternative to crimping in my first post. But don’t assume that the Sharkbite connection has the same longevity as crimping – just how it works.

How To Install A Water Line To Your Refrigerator


Comments are closed.

Hello! Do you need to find a sex partner? Nothing is more simple! Click here, free registration!